2012.11.09 20:09

This application requires more than two smart-phone devices.

By installing smart-phones in the house as web-cams or CCTVs, the application makes it possible to see images from a remote place by using another smart-phone with such communication environments as WIFI and 3G/4G in real time.

 

 

**NOTE!!**

For the server, it is required to set up the trial version!

Use the trial version before buying the product.

 

 

[Requirements]

1. The server smart-phone showing video images and audio clips.

2. The client smart-phone used to receive video images and audio clips in a remote place.

3. The WIFI sharing equipment used to get access to the Internet.

- This application requires more than two smart-phones.

 

[Basic Functions]

1. Real-time images from a remote place

2. Real-time audio clips from a remote place

3. Multiple access support for video images (Multiple access not granted for audio clips)

4. Possible remote control by using the basic server smart-phone (flash light & conversion of the front/back sides of the camera)

 

 

[Simple Description]

Nowadays, due to the wide distribution of smart-phones, the number of left-over smart-phones will increase.

By installing such smart-phones in houses, stores and offices, it is possible to receive video images and audio clips in real time anywhere and anytime.

Also, since it is possible to choose the front and the back sides of the camera remotely, you could have the effect of installing two cameras.

You could turn on the light remotely, so it is possible to use the function at night.

(However, remember that there are some old smart-phones without the light function.)

Compared to web-cams, you could experience some inconvenience since the computer must always be turned on.

However, compared to CCTVs and IP web-cam products, you could experience a high level of economic feasibility for electrical bills.

If you often have business trips overseas and are worried about your house, or

If you are worried about your family at home, or

If you are concerned about your own store, or

If you want to see your children in real time, or

If you have pets at home,

You are recommended to use this product.

For the user's manual, please refer to the website.

 ( http://bestcam.tistory.com )

 

*Installation fo Intranet

 

*Installation fo Extranet

 

저작자 표시
신고
Posted by 베스트솔루션 베스트솔루션
2012.11.07 06:18

 

 

[BestCam Communication Composition]

 

This application requires more than two smart-phone devices.

By installing smart-phones in the house as web-cams or CCTVs, the application makes it possible to see images from a remote place by using another smart-phone with such communication environments as WIFI and 3G/4G in real time.

 

 

 

[ Descriptions of Intranet, Extranet, and Port  ]

 

Let's take the example of a house.

What is Intranet?

It consists of all the devices connected to the WIFI sharing equipment in a house.

What is Extranet?

It can be regarded as the Internet line providing the functions of the Internet to the WIFI sharing equipment.

In order to get access to a certain program in a house through Extranet (Internet), it is required to have four kinds of information.

(Intranet Address, Intranet Port, Extranet Address, Extranet Port)


What is the reason for having such information?

You do not need to have such information if you use Intranet. However, since the application is used to see images from outside by installing a camera in a house, it is necessary for you to get access from outside.

 

 
[ DDNS of WIFI Sharing Equipment, Port Forwarding ]


The Internet line connected to an ordinary house requires a flexible kind of IP.

The communication provider could change xxx.xxx.xxx.xxx at any time.

If you want to know whether it is necessary to receive a fixed kind of IP, the answer is no.

Usually, the sharing equipment has the function of DDNS. DDNS is the function which provides the sharing equipment with a nickname. As a result, even if the IP address is changed, it is still possible to track down the nickname.

DDNS could provide the IPTIME products with such a nickname as xxx.iptime.org. Also, it dynamically allocates a port.

The sharing equipment provides the function of port forwarding which could change the port to a fixed one.

 

The basic description ends here.

저작자 표시
신고
Posted by 베스트솔루션 베스트솔루션
2012.11.07 06:18

 

[Server mode camera setup]

 

1. Click Setup as shown below after running this application.

 

 

2. Set up the port, id and password of the server.

 

* What is a port? In a easy way, it can be regarded as a program number.

It is possible to set the numbers between 1 and 65535. However, it is recommended to set the numbers between 1024 and 65535.

 

3. After carrying out the setup process, run Server Mode.

 

 

4. Check the connection to the WIFI sharing equipment.

* It is necsesary to connect the smart-phones acting as web-cams and CCTVs to WIFI.

 

 

 

* If the address appears as shown below, it can be regarded as a normal kind of Server Mode.


If the camera is activated for a moment before the screen goes black, the state can be regarded as Power-saving Mode for the reduction of the consumption of batteries after showing the images through the camera for five seconds.

 

 

 

 

 

[Client mode Smart-phone setup]

 

* What is Client Mode? It can be regarded as the smart-phone used to see the images through the camera installed in a house.

 

1. Click Client Mode to have the following screen.

 

 

2. Registration of the Camera (Click the button with the shape of a pencil.)

As shown below, insert the values set for the name, address and port of the server.

 

 

* Is it absolutely necessary to set up the values of ID/PW?

No. However, those values could be regarded as safety measures. If you set those values, the security line is reinforced.

 

 

3. After carrying out the setup process, you could have the camera button called 'TEST'.

You can see the red-colored camera on the top left side of the TEST button.

It means that the camera server is currently in the mode of normal activation.

If the red light is not on, it means that the server is not in the mode of normal activation or the Internet is going through some trouble.

 

 

4. If you click the camera button, the server camera can be shown in real time as below.

 

 


5. How to modify the camera setup?


As shown below, click the EDIT button on the left and activate the EDIT mode before modifying each category of the camera.

 

 


If you complete the process, 80% of the whole process can be regarded as being completed.

 

저작자 표시
신고
Posted by 베스트솔루션 베스트솔루션
2012.11.07 06:18

3. Installation of Extranet


Extranet is the setup of the WIFI sharing equipment.

Since I have the IPTIME sharing equipment, I will explain the process by using the IPTIME product. (Other products follow a similar process.)

 

In order to set up the sharing equipment, it is required to know the setup address.

The products other than the one of IPTIME basically have the setup condition of http://192.168.0.1 in the Explorer window.

The CISCO product has the setup condition of http://192.168.1.1

 

** It is required to carry out only two kinds of setup modes, Port Forwarding and DDNS in the sharing equipment.

The process can be described in order.

 

1. Get access to the setup window of the sharing equipment.

 

 

2. Check the inside address (the information of the inside network).

* As shown below, the sharing equipment allocates four inside addresses to the connected device between 192.168.0.2 and 254. The smart-phone which I am going to use is given the address of 192.168.0.7.

 

 

3. Setup of Port Forward

* As shown below, click the port forward category to see the window which can be used for the setup process as shown on the right.

 

Rule: BestCam_1 has been used.

Inside IP Address : 192.168.0.7 (The address must be written on the upper

left side of the Server Mode screen in the application.)

Inside Port : 55555 ~ 55555 (The port must be written on the upper left side

 of the Server Mode screen in the application.)

Outside Port : 55555 ~ 55555 (The value which is same as the one of

                                            the inside port must be written.)

Do you want to know more about the address or port?

You can see such numbers as 192.168.0.xxx : 55555.

The left side of ':' shows the address, while the right side represents the port number.


By clicking ADD, you could see that the adding process is done as shown below.

 

 

5. Setup of DDNS (The flexible kind of IP can be used as the fixed kind of IP.)

As shown below, move to the category of DDNS setup. Then, you could find the window in the form of red columns on the upper side through which you could carry out the registering process.

After writing down contents and adding them, the following window of normal registration (the category of access state) appears.

 

 

Now, you are ready for the outside access.

 

6. Client Mode (Edit Mode or New Addition)

* As shown below, insert the set value of DDNS on the Address.

* Insert the Port Forwarding value for the Port value.

* Insert the Setup value of the server for ID/PW.

 

7. Check through Extranet. (Check with outside WIFI, 3G and 4G.)

 

 

8. Click and get access.

 

 

Installation of Extranet  description ends here

저작자 표시
신고
Posted by 베스트솔루션 베스트솔루션
2012.11.07 06:18

[Clinet Button Function]

 

 

1. Camera Front/Rear change

 

2. Voice sound ON/OFF

 

3. Lighting ON/OFF

Function works only in Camera Rear mode.

 

4. Resolution&Frame

: High Frame / Low Frame change

 

5. Battery state.

====================================================================

[Limitations of the multiple-access]

1.video

- Multiple-connection possible.

 

2. voice sound.

- Multiple-connection is not possible.

- only last connection possible.

====================================================================

 

저작자 표시
신고
Posted by 베스트솔루션 베스트솔루션

티스토리 툴바